The Lunar New Year is approaching, and every household is busy with cleaning, and many car owners hurry to make an appointment for a car wash and beauty treatment for their loved car, because the car is just a façade, and only a new look can attract good luck. Persevere car detailing was a big hit before the new year, not only did the price soar, but it also took time to wait. APGO CEO Ye Yipeng suggested car owners, as long as they choose the right product through 5 steps, can easily DIY, make their car look brand new, and bring good luck throughout the year.

Ye Yipeng said that the five steps of easy DIY are 1. cold car, 2. cleaning the interior, 3. cleaning the exterior, 4. cleaning and decontamination, and 5. water coating on the car body. Select APGO Atomic glaze coating can use water to push the atomic glaze more evenly and brighten; as for the swirl on the paint surface of old cars caused by years of sandstone scratches or incorrect waxing actions, it is recommended to use APGO Acme Fine Compound, can reproduce the glossy paint surface and protection.

If you want to do DIY car washing and waxing, of course, you have to pay attention to some tips. Take a look at the five steps shared by APGO:

Car washing after cooling down: 

Do not start washing immediately when you find the water! The hood of the vehicle that has just been driven is still in a high-temperature state, and the cold water will damage the paint at this time. It is recommended to go to the car wash and park the car in the parking space. Open the hood to cool down for at least 15 minutes, and then start the car wash after making sure the car is cold.

Interior cleaning: 

While waiting for the car body to cool down, you can clean the interior of the car first, including vacuuming the carpet and wiping the panel. The interior space of the car is most afraid of mold and mildew in the airtight and humid space. The humidity of the wiping cloth should be controlled properly, so as not to accumulate water stains and cause trouble.

Flush with water:

To remove the dirt and dust adhering to the car body, it must be flushed with sufficient water. Of course, it is best to use high-pressure water jets to truly wash away the dirt. Simply spraying wet or spraying with air pressure is not enough. It is easy to scratch the paint and leave marks when scrubbing.

Cleaning and decontamination: 

It is recommended to use special car washing essence or foam from the self-service car wash. Friction is not easy to leave scars.

Car body coating: 

Spray APGO atomic glaze coating evenly when the car paint and water droplets are wet, it only takes 3 or 4 minutes to apply with water without wiping until it is dry, apply it evenly with a special coating cloth, and finally, use it dry wipe it dry with a towel and polish it, so that the car body seems to be covered with a layer of translucent protective film, quickly brightening, dustproof, sunscreen, and water-repellent. It is easy to use and has excellent results.

In addition to adopting the five steps of correct car washing, "APGO Acme Fine Compound " is aimed at removing small scratches and swirls on the car body. Improper car washing methods, too long maintenance period, and too deep environmental damage will leave scratches on the paint of your car. As long as the car is clean and dry, put the "APGO Acme Fine Compound " on a special sponge and wiped on the scratches. The heavily damaged parts can be reused to repair swirls on the paint surface without any traces, reproduce the luster of a new car like a mirror surface, and deeply restore the clear and translucent paint surface.

【APGO Atomic Glaze Coating Product】Information

Ingredients: Polymer, Surfactant, and Essence

Capacity: 200ml (one can use about 7 cars)

Storage: Please store at 0 to 40 degrees Celsius, do not expose it to the sun directly, store in a cool, dry, and ventilated place after use, and use it up within one year after opening.

The recommended price is NT$1,280, and the special price for new products is NT$599

【APGO Acme Fine Compound product】 information

Ingredients: Surfactant, Polishing abrasive particles, Essence, Water pure water

Capacity: 200ml

Storage: Please store at 0 to 40 degrees Celsius, do not expose it to the sun directly, store in a cool, dry, and ventilated place after use, and use it up within one year after opening.

Suggested selling price: NT$980, special price of NT$385 for new products