Want to the car wash, but don't know how to clean it? Car beauty expert – Ye Yipeng, CEO of APGO, said: As long as the car is cold, clean the interior first, rinse the exterior, clean and decontaminate, and coat in 5 steps, plus choose the right product, you can DIY easily by yourself.

If you want to do DIY car washing and waxing, of course, you have to pay attention to some tips. Take a look at the five steps shared by APGO:

Car washing after cooling down: Do not start washing immediately when you find the water! The hood of the vehicle that has just been driven is still in a high-temperature state, and the cold water will damage the paint at this time. It is recommended to go to the car wash and park the car in the parking space. Open the hood to cool down for at least 15 minutes, and then start the car wash after making sure the car is cold.

Interior cleaning: While waiting for the car body to cool down, you can clean the interior of the car first, including vacuuming the carpet and wiping the panel. The interior space of the car is most afraid of mold and mildew in the airtight and humid space. The humidity of the wiping cloth should be controlled properly, so as not to accumulate water stains and cause trouble.

Flush with water: To remove the dirt and dust adhering to the car body, it must be flushed with sufficient water. Of course, it is best to use high-pressure water jets to truly wash away the dirt. Simply spraying wet or spraying with air pressure is not enough. It is easy to scratch the paint and leave marks when scrubbing.

Cleaning and decontamination: It is recommended to use special car washing essence or foam from the self-service car wash. Friction is not easy to leave scars.

Car body coating: Spray APGO atomic glaze coating evenly when the car paint and water droplets are wet, it only takes 3 or 4 minutes to apply with water without wiping until it is dry, apply it evenly with a special coating cloth, and finally use it dry wipe it dry with a towel and polish it, so that the car body seems to be covered with a layer of translucent protective film, quickly brightening, dustproof, sunscreen, and water-repellent. It is easy to use and has excellent results.

After understanding the five steps of correct car washing, APGO also launched a secret method of "scratch removal" for old cars, using APGO Acme Fine Compound to remove small scratches and swirl on the car body; incorrect car washing methods, long maintenance cycle, If the environmental damage is too deep, the paint of the car will be left with circles of scratches. These scars are full of scars, and APGO Acme Fine Compound can solve them.

After the car is cleaned and dried, pour the APGO Acme Fine Compound on the special sponge and wipe it on the scratches. The heavily damaged parts can be reused to repair the sun marks on the paint surface without any traces, and reproduce the luster and depth of the new car on the mirror surface. The restored car paint is clear and translucent.

APGO Atomic Glaze Coating Product Information

Ingredients: Polymer, Surfactant, and Essence

Capacity: 200ml (one can use about 7 cars)

Storage: Please store at 0 to 40 degrees Celsius, do not expose it to the sun directly, store in a cool, dry, and ventilated place after use, and use it up within one year after opening.

The recommended price is NT$1,280, and the special price for new products is NT$599

APGO Acme Fine Compound product information

Ingredients: Surfactant, Polishing abrasive particles, Essence, Water pure water

Capacity: 200ml

Storage: Please store at 0 to 40 degrees Celsius, do not expose it to the sun directly, store in a cool, dry, and ventilated place after use, and use it up within one year after opening.

Suggested selling price: NT$980, special price of NT$385 for new products